Press Menu. Press Network.

Configuring your machine for a wireless network

1(Windows Vista®)

Click , Network, and then Add a wireless device.

(Windows® 7)

 

Click

, Control Panel, Network and Internet, and then

 

 

Add a wireless device to the network.

3

2

Choose your machine and click Next.

 

3

Input the PIN from the printed page and then click Next.

 

4

Choose your network that you want to connect to, and then click Next.

 

5

Click Close.

 

g A connection result message appears for 60 seconds on the LCD and a wireless LAN report will

automatically be printed. If the connection failed, check the error code on the printed report. uuQuick Setup Guide: Troubleshooting

(Windows®)

You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install MFL-Pro Suite from the CD-ROM menu.

(Macintosh)

You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please double-click Start Here OSX in the CD-ROM.

For MFC-J280W/J625DW/J825DW/J835DW/J5910DW and DCP-J525W/J725DW/J925DW

a b

c (MFC-J825DW/J835DW/J5910DW and DCP-J925DW only) Press WLAN.

d Press a or b to display WPS w/PIN Code, and press WPS w/PIN Code.

e When Enable WLAN? or Switch Network interface to wireless? is displayed, press Yes to accept.

This will start the wireless setup wizard.

To cancel, press Stop/Exit.

f The LCD will show an 8 digit PIN and the machine starts searching for a WLAN access point/router for 5 minutes.

21