Brother HL-P2000, MFC-P2000 PRINT, LAMPS AND SWITCH, CHAPTER, Ready (Paper) Lamp

CHAPTER 3 PRINT

CHAPTER 3

This section refers to the following lamps and switch on the machine control panel.

Drum

Alarm

Ready

Paper

Data

Toner

Fig. 3-1 Lamps and Switch on Control Panel

✒Note

When the power switch is off or the machine is in sleep mode, all lamps including the Ready lamp are off.

The Ready lamp indicates the current status of the machine.

	Lamp	Machine status
	Off	The power switch is off or the machine is in sleep
	Off	mode. If the machine is in sleep mode, it will wake
	❍	mode. If the machine is in sleep mode, it will wake
	❍	up automatically when it receives data or you
		up automatically when it receives data or you
		press the control panel switch.
	Blinking	The machine is warming up.
	❍↔●	(Blinking at 1 second intervals)
	❍↔●

	Blinking	The machine is cooling down and stops printing
	❍↔●	until the internal temperature lowers.
	❍↔●	(Blinking at 2 seconds intervals)
		(Blinking at 2 seconds intervals)
	On	The machine is ready to print.
	●

This lamp also works as the Paper lamp with the Alarm lamp. They blink simultaneously to indicate a paper error. See “Operator Calls” Chapter 7.

3-1