USER’S GUIDE

Test Print Mode

The machine has the following test print mode. Follow these steps:

1.Make sure that the top cover is closed.

2.Hold down the switch and turn on the power switch. Keep the switch depressed until the Drum lamp comes on.

The Drum lamp lights to indicate that the machine is in the test print mode.

3.Press the switch again to execute the test print or hold down the switch to select another option and release the switch to execute the selected option.

The test print modes are listed below:

Lamp Lit

Choice

Function

Drum

Test sample page

The machine prints a test sample page.

 

 

The machine returns to the ready status after

 

 

printing.

Alarm

Print Config & Print

The machine prints the current configuration of

 

Fonts I

the machine and a list of the internal fonts.

 

 

The machine returns to the ready status after

 

 

printing.

Ready

Factory Reset

The machine is restored to the factory setting

 

 

and permanent fonts and macros are cleared.

 

 

The machine returns to the ready status after

 

 

printing.

Data

Hex Dump Print

The machine can print data as hexadecimal

 

 

values, so that you can check data errors and

 

 

problems. To exit from this mode, you have to

 

 

turn off the machine.

3-4