USER’S GUIDE
For errors shown below, the machine indicates an operator call by blinking the Alarm lamp. If you use the machine with the supplied Windows driver, the status monitor will appear to indicate the error on your computer screen. The machine also prints some error messages on paper.
Error | Action |
COVER OPEN | Close the top cover of the machine. |
|
|
PRINT OVERRUN | Press the panel switch to print the data remaining in the |
| machine. |
| If you use the supplied Windows driver, try again after |
| turning on Error Recovery in the PRINT menu of your |
| application software, (Refer to the Help section in the |
| Windows machine driver for the details.) |
| If this does not clear the error, reduce the complexity of |
| your document or reduce the print resolution. |
MEMORY FULL
This error can only occur when using DOS.
Press the panel switch to print the data remaining in the machine.
Reduce the print resolution or reduce the complexity of
your document.
Parallel Interface Line Error
Press the panel switch to resume printing.
Check that the connection between your computer and machine is secure and correct, and check the interface cable.