Click Administrator.
Click Secure Function Lock.
Click Administrator.
Click Secure Function Lock.

NOTE

If you are using a Web browser to configure the machine's settings for the first time, set a password.

1Click

Please configure the password.

2Enter a password you want to use (up to 32 characters).

3Re-enter the password in the Confirm New Password box.

4Click Submit.

Setting and changing the Administrator Password

You can configure these settings using a Web browser. To set up the Web page, see Before you begin to use Secure Function Lock 2.0 on page 6. Then follow the instructions below.

Security features

Setting the administrator password

The password you set in these steps is for the administrator. This password is used to set up users and to turn Secure Function Lock on

or off. (See Setting up restricted users 2 on page 8 and Turning Secure Function Lock on/off on page 8.)

a b

c Enter a four-digit number for the password in the New Password box.

d Re-enter the password in the

Retype Password box.

e Click Submit.

Changing the administrator password

a b

c Enter a four-digit number for the new password in the New Password box.

d Re-enter the new password in the Retype Password box.

e Click Submit.

7