Press s or t on the Touchpanel to display General Setup.
Press General Setup.
Press s or t to display Function Lock.
Press Function Lock. Press Lock OffiOn.
Click Administrator.
Click Secure Function Lock.

Chapter 2

Setting up restricted users

You can set up users with restrictions and a password. You can set up to 10 users.

You can configure these settings using a Web browser.

To set up the Web page, see Before you begin to use Secure Function Lock 2.0 on page 6. Then follow the instructions below.

a b

c Enter an alphanumeric Group name or User name (up to 15 characters) in the ID Number/Name box and then enter a four-digit password in the PIN box.

d Uncheck the functions that you want to restrict in the Print Activities boxes and the Others boxes. If you want to configure the maximum page count, check the On box in Page Limit, and then enter the number in the Max. box. Then click Submit.

NOTE

•You cannot use the same password as another user’s password.

•You can set up one Public user. Public users do not need to enter a password. For more information, see Network User’s Guide.

Turning Secure Function Lock on/off

NOTE

Make a careful note of the administrator password. If you enter the wrong password, the Touchscreen will show Wrong Password. Enter the correct password. If you forget it, call Brother Customer Service.

Turning Secure Function Lock on

a Press (Settings).

b

c d

e f

g Enter your four-digit administrator password using the keyboard on the Touchscreen.

Press OK.

NOTE

The Secure Function Lock icon is prominently displayed on the Home screen.

8