PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
Restoring all settings to the factory settings
You can restore the PhotoCapture settings that you have changed, to the factory settings, such as Print Quality, Paper Type, Paper Size, Brightness, Contrast, Color Enhance, Cropping, Borderless and Print Date.
a
b Put the memory card or USB Flash memory drive in the correct slot.
c
Press View Photos and press
s or t on the Touchpanel to display each photo. When the photo you want to print is displayed, press OK.
Press Print All.
d e
f
g The Touchscreen asks you to confirm to change back to the factory settings. Press Yes to confirm.
h Press 
.
Scan to a memory card or USB Flash memory drive
How to set a new default
You can save the Scan to Media settings (Scan Type, Resolution, File Type and Remove Background) you use most often by setting them as the default settings. These settings will remain until you change them again.
a
b Put the memory card or USB Flash memory drive in the correct slot.
c Press |
| . |
|
| |
|
|
| |||
d Press |
|
| (Scan). | 8 | |
| |||||
e Press s or t on the Touchpanel to |
| ||||
display Scan to Media. |
| ||||
f g
h Press Scan Type, Resolution, File Type or Remove Background. Then press the option you want to set. Repeat this step for each setting you want to change.
i After you are finished choosing your preferred settings, press s or t to display Set New Default.
j
k Press OK.
The Touchscreen asks you again to
confirm that you want to set the changes
as the new default settings.
Press Yes.
l Press 
.
61 