Press Numerical.

NOTE

•(USA only) If you redial from the Caller ID history outside your area code, you must set up your AREA CODE in advance.

(See Setting up your area code (USA only) on page 32.)

•You can print the Caller ID history List. (See How to print a report on page 41.)

Dialing access codes and credit card numbers

Sometimes, you may want to choose from several long-distance carriers when you send a fax. Rates may vary depending on the time of day you’re sending the fax and the destination to which you're sending it. To take advantage of low rates, you can store the access codes of long-distance carriers and credit card numbers as Speed Dial numbers. You can store these long dialing sequences by dividing them and setting them up as separate Speed Dial numbers in any combination. You can even include manual dialing using the dial pad. (See Basic User’s Guide: Storing Speed Dial numbers.)

For example, you might have stored ‘555’ on Address Book: 03 and ‘7000’ on Address Book: 02. You can use them both to dial ‘555-7000’ if you press the following buttons on the Touchscreen:

a Press (Fax).

b Press (Address).

c

d Press s or t on the Touchpanel to display #03.

e Press #03.

f Press Send a fax. g Press Options.

Dialing and storing numbers

h Press s or t to display Address Book.

i Press Address Book.

j Press Numerical.

k Press s or t to display #02. l Press #02.

m Press Send a fax. n Press Fax Start.

You will dial ‘555-7000’.

5

To temporarily change a number, you can

 

substitute part of the number with manual

 

dialing using the dial pad. For example, to

 

change the number to 555-7001 you could

 

press (Address), press 03, press

Send a fax and then press 7001 using the dial pad.

NOTE

If you must wait for another dial tone or signal at any point in the dialing sequence, create a pause in the number by pressing Pause. Each key press adds a

3.5-second delay. You can press Pause as many times as needed to increase the length of the pause.

35