Chapter 8
Color Enhancement (True2Life™)
You can turn on the color enhancement (True2Life™) feature to print more vivid images. Print time will be slower.
a
b Put the memory card or USB Flash memory drive in the correct slot.
c Do one of the following:
Press View Photos and press
s or t on the Touchpanel to display each photo. When the photo you want to print is displayed, press OK.
Press Print All.
d Press Options.
e Press s or t to display
Color Enhance.
f Press Color Enhance. g Do one of the following:
If you want to adjust the
White Balance, Sharpness or Color Density, press Color Enhance and then press On.
Go to step h.
If you do not want to adjust the color settings, press Color Enhance and then press Off.
Press 
. Go to step k.
h Press s or t to display
White Balance, Sharpness or Color Density, and then press the option you want to change.
i Press d or c to adjust the degree of the setting.
Press OK.
j Do one of the following:
If you want to adjust another color setting, repeat steps h and i. Press 
.
If you want to change other settings,
press 
to display the print setting menu and press the setting you want to change. (See page 55.)
k If you do not want to change additional settings, press 
or OK.
l Press Start to print.
NOTE
•White Balance
This setting adjusts the hue of the white areas of an image. Lighting, camera settings and other influences will affect the appearance of white. The white areas of a picture may be slightly pink, yellow or some other color. By using this setting, you can correct that effect and bring the white areas back to pure white.
•Sharpness
This setting enhances the detail of an image, similar to adjusting the fine focus on a camera. If the image is not in true focus and you cannot see the fine details of the picture, then adjust the sharpness.
•Color Density
This setting adjusts the total amount of color in the image. You can increase or decrease the amount of color in an image to improve a washed out or weak picture.
58