n The Touchscreen shows:
Set the next page, then press Scan. When you finish, press Complete.
Place the next page on the scanner glass and press Scan.
Press OK.
The machine starts printing.
o If you pressed Sort for multiple copies, repeat step n for each additional page. After all the pages have been scanned, press Complete.
The machine starts printing.
DO NOT touch the printed page until it is ejected the second time. The machine will
Making copies
b
c Press s or t on the Touchpanel to display the available settings, and then press the setting you want to change. Press s or t to display the available options, and press the option you want to set. Repeat this step for each setting you want to change.
d After changing the last setting, press
sor t to display Set New Default.
e
f Press OK.
The Touchscreen asks you again to confirm that you want to set the changes as the new default settings.
print the first side and eject the paper, and then pull the paper in to print the second side.
NOTE
Press Yes.
g Press 
.
7
If you get a paper jam, press Advanced after step i, and then press one of the jam prevention settings:
Setting your changes as the new default
You can save the settings for the copy options you use most often by setting them as the default, such as Quality,
Tray Select 1, Enlarge/Reduce,
Density, Page Layout, Ink Save Mode,
Thin Paper Copy, Remove Background
and
These settings will remain until you change them again.
1
a Press 
(Copy).
Restoring all settings to the factory settings
You can restore the copy settings that you have changed to the factory settings, such as
Quality, Tray Select 1,
Enlarge/Reduce, Density,
Page Layout, Ink Save Mode,
Thin Paper Copy, Remove Background
and
1
a Press 
(Copy). b Press Options.
c Press s or t on the Touchpanel to display Factory Reset.
d Press Factory Reset.
e Press Yes.
f Press 
.
51 