50
To turn on or off the Length function:
1While holding down c, press T once, and keep c held down to display the
current length of the label (the text and both margins) briefly, then display the current
label length setting (ON or OFF).
2While still holding down c, continue pressing T until the desired label length set-
ting is displayed.
☞The Length indicator comes on when ON is selected.
3Release c. If ON was selected, the current label length setting is displayed.
4Press h or e to select the desired length or use the number keys to enter a length.
☞To change the units (inches or centimeters) used to display the label length, press
M until the desired units are displayed.
To change the length in 1” (1.0-cm)-steps, hold down either h or e, and then
release the key when the desired setting is displayed.
5Press r.
EXAMPLE
To select a label length of 5”:
1While holding down c, press T once, and keep c held down.
2While still holding down c, continue press-
ing T until ON is displayed.
3Release c.
5.3inch
LENGTH
Caps
Alt
Caps
Alt
OFF
LENGTH
Caps
Alt
ON
LENGTH
4.0inch
LENGTH
Caps
Alt