Error Message | Cause | Remedy |
|
|
|
CUTTER | This message appears if the tape cut- | Turn the |
ERROR! | ter is closed when you try to print or | again. |
| feed the tape. |
|
|
|
|
EEPROM | This message appears if a checksum | Contact your service representa- |
ERROR! | error occurred when the | tive. |
| turned on or if the keyword was dam- |
|
| aged and it failed to initialize. |
|
|
|
|
INTERFACE | This message appears if an error | Cancel the print job, and then |
ERROR! | occurs while data is being sent from | try printing again. |
| the computer to the |
|
|
|
|
INVAL. | This message appears if the cursor is | Move the cursor below a |
CHRS! | not below a number when you hold | number before holding down |
| down c and press O. | c and pressing O. |
|
|
|
LENGTH | • This message appears if the text is | • Shorten the text to less than 3’ |
LIMIT! | longer than 3’ 3 1/3” (1 meter) when | 3 1/3” (1 meter) before trying |
| you try to print. | to print. |
| • This message appears if the Length | • Set the label length between |
| function is used to set a label | 1.6” (4.0 cm) and 11.8” (30.0 |
| length that is less than 1.6” (4.0 | cm). |
| cm) or more than 11.8” (30.0 cm). |
|
| • This message appears if the Tab | • Set the tab length so that it is |
| Length function is used to set a tab | less than 11.8” (30.0 cm). |
| length that is more than 11.8” |
|
| (30.0 cm). |
|
|
|
|
LINE | This message appears if the number | Reduce the number of lines or |
LIMIT! | of lines in the text is greater than the | install a tape of greater width. |
| maximum number of lines possible |
|
| for the installed tape. |
|
|
|
|
MEMORY | This message appears if you try to | Delete an unwanted file to make |
FULL! | store a text file after 300 characters | room for the new one. |
| have already been stored in the |
|
| memory. |
|
|
|
|
NO | This message appears if you try to | Store a text file first. |
FILES! | recall or delete a text file from the |
|
| memory when none are stored. |
|
|
|
|
62