Brother P-touch 2300, P-touch 2310 INSTALLING P-TOUCH EDITOR

7
The P-touch Editor software adds even more illustration and layout features to the label-mak-
ing possibilities available with your PT-2300/2310.
☞
Do not connect the PT-2300/2310 to the computer before installing the P-touch Editor
software, otherwise it may not be installed correctly. Be sure not to connect the PT-
2300/2310 until you are instructed to do so.
On an IBM PC-Compatible Computer
To install the P-touch Editor software:
1Check that your system configuration meets the following requirements.
Computer: IBM PC or compatible
Operating system: Microsoft® Windows® 2000 or pre-installed with Microsoft® Win-
dows® 98/98SE/Me
Hard disk free space: At least 20 MB
☞A few hundred megabytes of additional free space may be needed when printing
long labels or large amounts of data.
Available memory: Minimum 32 MB
Monitor: VGA or higher graphics card
USB port
CD-ROM drive
2Insert the P-touch Editor Version 3.1 CD-
ROM into the computer’s CD-ROM drive. A
dialog box automatically appears, allowing
you to select what to install.
☞If the dialog box does not automatically
appear, double-click “My Computer” on
the desktop, double-click the icon for
the CD-ROM drive containing the CD-
ROM, and then double-click
“Ptsetup.exe” to display the dialog box.
INSTALLING P-TOUCH EDITOR