Brother S-7200C -. Adjusting the needle up stop position

S-7200C
10. ADJUSTMENTS
126
１０-１５. Adjusting the needle up stop position
<G50 operation panel>
1
(While pressing the key (1), press the power ON switch.) “MorG xxx” will appear in orange in the main display (2).
(xxx is the value at the time of shipment from the factory,
and varies depending on the sewing machine.)
2
Selecting “UpoS xxx”
(Press once)
“xxx” is the setting value for the needle up stop position, and
“0” is the default setting.
3
Needle up stop position setting
・ If you press the key, the setting value will increase
and the needle up stop position will become lower.
・ If you press the key, the setting value will decrease
and the needle up stop position will become higher.
・ The setting range is from –10 to 10.
* A setting value of “10” corresponds to an angle of rotation
of approximately 10° for the upper shaft.
4
The setting values will be memorized.
5
Normal sewing machine operation will then be possible.
2128B 2138M
4191M 2138M 2139M
4190M
Example:
(Setting value)
4192M
Becomes higher
Becomes lower
4193M