S-7200C
5. FUNCTION SETTINGS (G10 OPERATION PANEL)
40
<Setting item list> Display
Setting item Setting item
display
Setting value
display
Setting value or operation when setting Default
value
[ UP] Needle up stop
Needle up/down stop [UPDN] [ DN] Needle down stop [ DN]
[ ON] Correction sewing
Correction sewing [CORR] [ OFF] No correction sewing [ OFF]
[ ON] Slow start
Slow start [SLOW] [ OFF] No slow start [ OFF]
[ ON] Thread trimming disabled
Thread trimming disable [TRDI] [ OFF] Thread trimming enabled [ OFF]
Start backtack speed [SBSP] [****]
Inching speed (*1)-3000
(Initial value depends on machine head
specifications)
[1200]
[1800]
[ ON] Automatic operation
Automatic operation
during continuous
backtack sewing
[CBAT] [ OFF] No automatic operation [ OFF]
[ OFF] No switching
[ 1] Slow start only when sewing starts after
thread trimming
[ 2] Slow start only when sewing starts after
sewing has been paused
Pedal response switching
settings immediately after
sewing has started
[SLMD]
[ 3] Slow start always when sewing starts
[ OFF]
Pedal response
immediately after sewing
has started
[SLPN] [ *]
* Setting range: 1-5
・ The larger the value, the slower is the
speed when sewing starts.
・ If [SLMD] is set to “OFF”, this setting is
disabled.
[ 1]
[ 2] A-B
[ 3] B-A-B
[ 4] A-B-A-B
[ 5] B-A-B-A-B
Start backtack sewing
pattern [SBT P]
[ 6] A-B-A-B-A-B
[ 2]
[ 2] C-D
[ 3] C-D-C
[ 4] C-D-C-D
[ 5] C-D-C-D-C
End backtack sewing
pattern [EBT P]
[ 6] C-D-C-D-C-D
[ 2]
[ 1] A, B, C, D Continuous backtack
sewing pattern [RBTP] [ 2] A, B × D [ 1]
[ ON] Function available Quick reverse needle up
function [ RUP] [ OFF] F unction not available [ OFF]
[ ON] Function available Backtack matching
function [BTAD] [ OFF] Function not available [ OFF]
(*1) The inching speed setting value is the value in the machine head memory.