S-7200C
10. ADJUSTMENTS
127
<G10 operation panel >
1
(While pressing the key (1), press the power ON switch.) “MorG” will appear in the display (2).
2
Selecting “UPoS”
(Press once)
3
Needle up stop position setting
・ If you press the key, the setting value will
increase and the needle up stop position will
become lower.
・ If you press the key, the setting value will
decrease and the needle up stop position will
become higher.
・ The setting range is from –10 to 10.
* A setting value of “10” corresponds to an angle of
rotation of approximately 10° for the upper shaft.
4
The setting will be stored and the display will return
to the setting item.
5
Normal sewing machine operation will then be
possible.
4219M 2138M 2139M
4217M
2138M
(Setting value)
4218M
(Setting item)
Example:
4220M
4206M
Becomes higher
Becomes lower
(Setting item)