Brother S-7200C -. Data initialization function

S-7200C

5. FUNCTION SETTINGS (G10 OPERATION PANEL)

５-３. Data initialization function

NOTE:

When DIP switch 1 is set to ON, set it to OFF and then carry out the following operations.

Change to initialization mode

(While pressing the continuous backtack key, press the power ON switch.)

* The only initialization item is clear all.

Display

Initialization item

1 [in.AL]

Clear all

(Sewing programs (panel display), memory switch settings, speed settings and

function settings [Refer to <Setting item list> (P.40)] will be initialized.)

Function setting mode will be exited and normal operation will be possible.

(If you would like to cancel initialization, set the power switch to OFF.)

4206M

[in.AL] will appear in the display (1).

(Press for 2 seconds or more.)

4222M