Brother XL-3510i, XL-2610i, XL-3520i, XL-2620i operation manual

KNOWING YOUR SEWING MACHINE —————————————————————————————————————————

1Follow steps 1 and 2 from “Lower Threading”.

2Put the bobbin in, feed the end of the thread through the slit, and then pull the thread to cut it.

•Only use bobbins that were designed to be used with this machine.

CAUTION

●Make sure you set the bobbin so the thread unrolls in the right direction. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or break the needle.

1

1Cutter

•Make sure that the thread is correctly inserted through the tension-adjusting spring of the bobbin case. If it is not inserted, re- insert the thread.

3Reattach the bobbin cover. Put the left tab in place (see arrow 1), and then press lightly on the right side (see arrow 2) until the cover clicks into place.

2

1

•You can begin sewing immediately without drawing up the bobbin thread. If you want to draw up the bobbin thread before you start to sew, follow the procedure in “Drawing up the Lower Thread” (page 24).

1

1Tension-adjusting spring

20