Brother XL-2620i, XL-2610i, XL-3520i, XL-3510i Blind Hem Stitching, Shell Tuck Stitching, 3/16

3BUILT-IN STITCHES

Blind Hem Stitching

		Stitch	Stitch
Stitch Name	Pattern	Length	Width
		[mm (inch)]	[mm (inch)]
Blind Hem		F-2	3-5
Stitch		(1/64-1/16)	(1/8-3/16)
Stretch Blind		F-1.5	3-5
Hem Stitch		(1/64-1/16)	(1/8-3/16)
Stretch Blind		F-1.5	3-5
Hem Stitch		(1/64-1/16)	(1/8-3/16)

You can use the Blind Hem Stitch to finish the edge of a project, like the hem of a pair of trousers, without the stitch showing. Use the Blind Hem Stitch when sewing on non-stretch fabrics, and the Stretch Blind Hem Stitch for stretch fabrics.

1Bothfabric.threads should be the same color as the

2Fold back the hem, as shown in Fig. A. Then fold the edge of the fabric as in Fig. B. Leave a 6 mm (15/64 inch) overlap at the edge.

3Set the pattern selection dial to the Blind Hem Stitch or Stretch Blind Hem Stitch, and then set the stitch length.

4Sew on the fold as in Fig. C.

5When the fabric is unfolded you will have a Blind Hem Stitch as shown in Fig. D.

2 3 1

AB

1 2

4

12

C	D	3
2		1

1Right side of fabric

2 Wrong side of fabric

3 10 mm (3/8 inch)

4 5 mm (3/16 inch)

Note

●The Stretch Blind Hem Stitch is useful for stretch fabrics.

Shell Tuck Stitching

		Stitch	Stitch
Stitch Name	Pattern	Length	Width
		[mm (inch)]	[mm (inch)]
Shell Tuck		F-3	3-5
Stitch		(1/64-1/8)	(1/8-3/16)

The Shell Tuck Stitch can be used to sew a picot (lace-like) edge on lightweight fabric.

1SetStitch.the pattern selection dial to the Shell Tuck

2Adjust the thread tension so that it is tighter than normal.

3Place the fabric under the presser foot so that it will be sewn along the bias, with the straight stitches sewn on the seamline and the zigzag stitches sewn slightly over the folded edge.

29