Brother XL-2610i, XL-3520i, XL-3510i, XL-2620i operation manual Stitch Length Dial, Fagoting Stitch

KNOWING YOUR SEWING MACHINE —————————————————————————————————————————

	Pattern		Stitch Name	Recommended	Recommended	Instruction
				Width	Length
35 Stitches		25 Stitches				Manual Page
				(mm (inch))	(mm (inch))
			COMB STITCH	3-5	Fixed	31
				(1/8-3/16)	2.5 (3/32)
			COMB STITCH	3-5	Fixed	31
				(1/8-3/16)	2.5 (3/32)
			DECORATIVE STITCH	3-5	Fixed	33
				(1/8-3/16)	2.5 (3/32)
			FAGOTING STITCH	3-5	Fixed	31
				(1/8-13/64)	2.5 (3/32)
			DECORATIVE STITCH	3-5	Fixed	31
				(1/8-3/16)	2.5 (3/32)
			DECORATIVE HEM STITCH	3-5	Fixed	33
				(1/8-3/16)	2.5 (3/32)
			DECORATIVE STITCH	3-5	Fixed	33
				(1/8-3/16)	2.5 (3/32)

Stitch Length Dial

Depending on the selected stitch, you may need to adjust the stitch length for best results.

The numbers marked on the stitch length dial represent the stitch length in millimeters (mm) (1/25 inch).

THE HIGHER THE NUMBER, THE LONGER THE STITCH. With the “0” setting, material is not fed. This is used when sewing a button.

The “F” range is for making a satin stitch (close zigzag stitch), which is used for making buttonholes and decorative stitches. The position needed for making the satin stitch varies according to the material and thread being used. To determine the exact dial position, first test the stitch and length settings on a scrap piece of fabric to observe the feeding of the material.

2 3

1 1

CAUTION

●If the stitches are bunched together, lengthen the stitch length and continue sewing. Do not continue sewing without lengthening the stitch length, otherwise the needle may break and cause injury.

1Stitch length dial

2 Shorter

3 Longer

14