Brother XL-3520i Straight And Zigzag Stitching, Please Read Before Sewing, Straight Stitching

Models: XL-3510i XL-2610i XL-2620i XL-3520i

1 52
Download 52 pages 15.69 Kb
Page 29
Image 29
2STRAIGHT AND ZIGZAG STITCHING

2STRAIGHT AND ZIGZAG STITCHING

Please Read Before Sewing

Please Read Before SewingStraight StitchingCAUTION

To avoid being injured, watch the needle carefully while you are using the machine. Keep your hands away from moving parts.

Do not stretch or pull the fabric during sewing, otherwise the needle may be damaged and you may be injured.

Do not use bent or broken needles, otherwise you may be injured.

Take care that the needle does not hit basting pins or other objects during sewing. The needle may break and you may be injured.

Always use the correct presser foot. If you use the wrong presser foot, the needle may hit the presser foot and bend or break and you may be injured.

When you turn the handwheel by hand, always turn it toward you (counterclockwise). Turning it the other way may cause the thread to tangle and damage the needle or fabric, and you may be injured.

2

Straight Stitching

 

 

Stitch

Stitch

Stitch Name

Pattern

Length

Width

 

 

[mm (inch)]

[mm (inch)]

Straight Stitch

 

1-4

 

 

(1/64-3/16)

 

 

 

 

 

 

Fixed

5-0*

 

 

(3/16-0)

Triple Stretch

 

2.5 (3/32)

 

 

Stitch

 

Fixed

 

 

 

 

 

 

2.5 (3/32)

 

*Turn the stitch width dial to adjust the needle position. Setting the dial to 5 selects the left needle position; setting the dial to 0 selects the right needle position.

Starting Sewing

1Turn the pattern selection dial to choose the stitch number you want. You also need to set the pattern selection dial to the Straight Stitch or Triple Stretch Stitch.

2Raise the needle to its highest position and lift the presser foot lever.

3Pullpresserthefoot.upper thread though the toes of the

4Put the fabric under the presser foot and position the needle 1 cm (3/8 inch) from the edge of the fabric.

5Lower the presser foot.

6To back tack, push down the reverse sewing lever as far as possible, and then press the foot controller to start reverse sewing. Release the foot controller to stop sewing.

7Release the reverse sewing lever and start sewing in the forward direction by pressing the foot controller.

You can use reverse sewing for locking the end of seams and to strengthen a stitch.

Manual backgroundManual backgroundCAUTION

Make sure the needle does not hit a pin or any other object during sewing. The thread could tangle or the needle could break, and you may be injured.

27

Page 29
Image 29
Brother XL-3520i, XL-2610i, XL-3510i, XL-2620i Straight And Zigzag Stitching, Please Read Before Sewing, Straight Stitching