Brother XL-3520i, XL-2610i, XL-3510i, XL-2620i operation manual Hook 2 Thread

Models: XL-3510i XL-2610i XL-2620i XL-3520i

1 52
Download 52 pages 15.69 Kb
Page 25
Image 25
1Hook

4Pull down the needle threader lever as much as possible, and then turn the lever toward the back of the machine (away from you). Make sure that the hook passes through the eye of the needle and grabs the thread.

2

1 1

1Hook

2 Thread

Hold the thread in front of the needle to make sure that the hook grabs it.

5While lightly holding the thread, turn the needle threader lever toward the front of the machine (toward you). The hook will pull the thread through the needle.

6Raise the needle threader lever and pull out about 5 cm (2 inch) of thread through the needle toward the back of the sewing machine.

1

Manual backgroundManual backgroundCAUTION

The needle threader can only be used with home sewing machine needles size 75/11-100/16. Check the table on page 26 for the appropriate needle and thread combinations. If you are using transparent nylon mono-filament thread, you can only use needles in the range of 90/14-100/16.

You can not use the needle threader if you are using decorative threads or special needles, such as the twin needle and wing needle.

When using these needles or threads you will need to thread the needle by hand. Make sure the main power switch is off when threading.

23

Page 25
Image 25
Brother XL-3520i, XL-2610i, XL-3510i, XL-2620i operation manual Hook 2 Thread