BT PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672

40 Additional settings

Voice call alert

If connected to a switchboard, see page 61.

If your BT PaperJet 30 is set to PHONE/FAX reception, it will automatically alert you to voice calls with a 20 second tone. You can change the duration of the tone, from 15 to 40 seconds.

1.Press repeatedly until the display shows INSTALLATION.

2.Press repeatedly until the display shows FAX/TEL TIMER:20.

3.Press or to scroll through the options: 15, 20, 30 or 40.

4.Press to confirm the option displayed.

5.Press to return to standby.

Remote start code

If you answer a call on an extension phone, before BT PaperJet 30 has automatically answered, and then find it is a fax call, you can transfer the

call to the BT PaperJet 30 by pressing on the keypad of your phone.

You can change the 5 to another number 0-9 or if required. You can also switch remote start off.

1.Press repeatedly until the display shows INSTALLATION then

press to display TEL. LINE SET-UP.

2.Press again. The display shows PUBL.LINE(PSTN).

3.Press repeatedly until the display shows REMOTE START:ON.

4.To switch the code off, press or to scroll to OFF and press to confirm.

Or

To change the code press . The display shows TYPE CODE above the current code.

5.Enter the new code - or .

Page 40
Image 40
BT 30 manual Additional settings Voice call alert