Diverse 5410 user guide 22/8/03 10:15 AM Page 57
Note
If all internal numbers have been assigned then the internal number 6 will be
To manually register a BT Diverse 5400 handset to another base station.
If you want to register your handset to another base station you will need to manually register it.
On the handset to be registered:
MENU Press MENU.
Scroll DOWN to
H/set Settings.
OK Press OK.
Scroll DOWN to
Register Handset.
OK Press OK.
Enter the system PIN. (Original setting 0000).
OK Press OK.
If the base station is a
BT Diverse 5410, press the PAGE PAGE button until you hear a beep – after approximately
three seconds.
After approximately one minute the handset will display its internal number. The handset is now registered and the handset display will return to the idle screen.
If the base is not a 5410 you will need to follow the user guide for the base station you are registering the 5400 handset to.
Note
To make internal calls or page handsets, see page 18.
To register BT Diverse 2000/3000/4000 series handsets and other makes
Providing your handset is GAP (Generic Access Profile) compliant, you can register it to your BT Diverse 5410 base.
Place your handset into registration mode according to the instructions in its user guide.
When the handset is in registration mode, you will need to:
Press the PAGE button located on the top of your BT Diverse 5410 base station until there is a beep after approximately three seconds.
ADDITIONAL HANDSETS
BT Diverse Helpline – 08457 908 070
57
