BT BT Diverse 5450 Using a handset as a room monitor, To de-register a handset, De-reg H/set. No

BT Diverse 5450 ~ 6th Edition ~ 29th August ’03 ~ 5199

After a short period of time the handset will be registered. The BT Diverse 5450 will be allocated the next available handset number.

Note

To check that the handset has been registered successfully to the base, press the PAGE button, all handsets will ring.

To de-register a handset

Using a handset as a room monitor

If you have at least two handsets registered to your BT Diverse 5450 base station you can leave one handset in a room and monitor the sounds in the room by making an internal or an external call to another handset. This could be used, for example, in a child’s bedroom.

Place the handset 1-2 metres away, with the microphone facing the child. Always check that the phones are working properly.

ADDITIONAL HANDSETS

INT M

Press the INT button. Display lists the registered handsets.

Press UP/DOWN to highlight the handset you want to de-register.

Note

The room monitor function drains the handset batteries more quickly than normal use. Make sure the handset is fully charged before leaving it in the room to be monitored.

OK Press MENU.

Scroll DOWN to

De-reg H/set. No.

OK Press OK.

Enter the system PIN. (Original setting 0000).

OK Press OK to confirm de-registration.

Press RED PHONE to return to the idle display.

To switch the room monitor on

When there are sounds in the room, the monitor function detects them.

The listening handset then rings either the receiving handset selected or the phone number you have set. You can then listen.

BT Diverse Helpline – 08457 908 070

78