5757 Equinox 1200 UG 28/5/04 10:32 am Page 79
BT Equinox 1200 – Edition 6 – 28.05.04 – 5757
General information | 79 |
|
|
Access code and entering a pause
If you are connecting your BT Equinox 1200 to a switchboard/PBX you may need to prefix stored numbers with an access code (e.g. 9) in order to get an outside line. So that the switchboard has time to pick up an outside line, you may also need to add a Pause after the access code.
A pause is entered when storing a number in the phonebook (see page 23) or PABX access code (see page 55) by pressing and holding the 
button until the display shows P.
Dialling mode
With some switchboards/PBXs you may need to switch the dial mode from Tone to Pulse, otherwise you should not need to adjust this setting.
1.Press MENU then scroll 
to Base Settings and press OK. Press 
to highlight Dial Mode then press OK.
2.Press 
or 
to highlight the setting you want. Press OK to confirm.
