Response 75 – Edition 7 – 26th October ’00 – 3370
Using your Response 75
Answering machine controls
To set the answering machine
Ans. mode
Ans. mode
To set the answering machine to Answer Only mode:
Press the Ans. Mode button.
You will hear “Answer Only on” and the display will show 
. Callers will not be able to leave a message.
You can switch your answering machine on and off or set it to Answer Only mode so callers are unable to leave messages.
Press buttons in the order shown
To switch the answering machine on or off:
Answer Press the Answer on/off button. on/off You will hear “Answer on” or
“Answer off”.
When off, the display shows a single dash.
When on, the display shows the number of messages received e.g 5.
Answer Press the Answer on/off button
on/off
again to switch between on and off.
If you press the Ans. Mode button again you will hear “Answer only off ”. Your Response 75 will return to Answer On mode and display the number of messages received.
To adjust the loudspeaker volume
The message playback volume can be set to a level suitable for you.
The original volume setting is 3
Volume + To increase the volume.
–Volume To decrease the volume.
As you press, a beep sounds at the level you are selecting. When the volume is at its highest or lowest level you will hear 2 beeps.
9
