Response 75 – Edition 7 – 26th October ’00 – 3370

Remote access

You can switch on and operate your answering machine from another TouchTone phone to play back your messages and memos

Your security code

To keep your messages private, your Response 75 requires you to enter a 2-digit security code before you can play back your messages.

For your security code, look at the swing out label on the underside of the machine. (You cannot change the security code).

To operate your Response 75 remotely

Dial your Response 75 phone number.

When you hear your outgoing KEYPAD message, press the button.

You will hear 2 beeps.

The message counter on your

Response 75 will flash ‘A’.

KEYPAD Key in the first digit of your security code (within 8 seconds). You will hear a beep.

KEYPAD Key in the second digit of your security code. You will hear a beep.

If you enter the incorrect code, your Response 75 will announce “Security code error.

Please enter again”. If you enter the wrong code again, your Response 75 will announce “Security code error. Thank you for calling” and then end the call.

Once you have entered the correct security code, you can operate your Response 75 remotely.

If you have no messages, your Response 75 will announce “You have no messages” and wait for 8 seconds for you to enter another remote instruction.

If you have new messages, your Response 75 will announce “You have ‘x’ message(s)”, and then play them back to you. See ‘Menu for remote access’, page 19 for more remote functions.

To turn your Response 75 on

This is useful if you forgot to turn on your answering machine before going out.

Ring your Response 75. It will answer the call after 20 rings. When you hang-up, the answering machine will be switched on and will answer calls.

18

Page 20
Image 20
BT RESPONSE75 manual Remote access, To operate your Response 75 remotely, To turn your Response 75 on