Response 75 – Edition 7 – 26th October ’00 – 3370

To check your outgoing

Call counter

message

 

Select the Answer mode in which you want to check your OGM:

Answer Answer on/off

on/off

or

Ans. mode Answer Only.

OGM Press the OGM button.

Your outgoing message will be played back to you.

To delete your outgoing message

 

You can delete either of your

 

outgoing messages and return

 

to one of the pre-recorded

 

outgoing messages.

 

Ensure that you select the

 

correct outgoing message that

 

you want to delete. For example,

 

if you want to delete the

 

Answer Only outgoing message

 

make sure your Response 75

 

is set to Answer Only first.

OGM

Press the OGM button.

 

During playback of your

 

outgoing message press the

Delete

Delete button.

 

Your OGM will stop playing,

 

you will hear a short beep and

 

your Response 75 will return

 

back to the pre-recorded

 

outgoing message

The counter will display the number of messages that have been recorded in the memory.

If you have received 10 or more messages the display will flash 9 to indicate this.

Please see page 23 for a guide to the display.

To set the answer delay

Your Response 75 is set to answer calls after 4 rings

You can change the number of rings before your Response 75 will answer a call. You have a choice of between 2-9 rings and Time Saver.

Please note

The Time Saver setting can avoid you the cost of a call when accessing your machine remotely from an external telephone.

When set to Time Saver your Response 75 will answer after 6 rings if no new messages have been recorded, or 2 rings if new messages have been recorded (for more information on remote access, see page 18).

Skip 

Press and hold the Skip 

button.

 

12

Page 14
Image 14
BT RESPONSE75 manual To check your outgoing, Message, To delete your outgoing message, To set the answer delay