Response 75 – Edition 7 – 26th October ’00 – 3370
Setting up
Follow these steps to set up your Response 75 ready for use
Plan the location of your Response 75
Situate your Response 75 close enough to the phone and mains power sockets so that the cables will reach.
2Plug the mains power cord into the back of the machine
To prevent the mains cable being pulled out accidentally, place the cable behind the clip on the back of the unit.
1Check your telephone wall socket
If you do not have a modern phone socket, call Freephone 0800 800 150 and ask for a BT engineer to come and fit the correct socket.
This is a chargeable service.
3Plug the adaptor into a mains power socket
The display will flash for 38 seconds. It will then show the normal ‘no messages’ display. The display will flash slowly until any button is pressed.
5
