Response 75 – Edition 7 – 26th October ’00 – 3370
Your Response 75 announces the current ring delay and the message counter displays the selected answer delay setting.
Keep holding the Skip button. Your Response 75 announces and displays the answer delay options.
When you hear your desired setting, release the Skip button. After 2 seconds your Response 75 will announce the new answer delay setting and then return to ‘Answer On’ mode. The setting will be shown on the display.
To check the answer delay setting
Skip Press the Skip button.
You Response 75 will announce the current ring delay setting and show the setting on the display.
Receiving messages
After following the
To receive incoming messages
Your Response 75 will automatically record an incoming message when it is connected to your phone socket and is set to ‘Answer On’.
When your Response 75 has received new messages (or memos) it will beep (see ‘Audible Message Alert to switch off ’) and the display will show the number of messages received. If you have more than 9 messages, the display will flash 9.
Please note
Two minutes is the maximum time allowed for each incoming message. If the maximum message length is reached, your Response 75 will announce, “Thank you for calling” and disconnect the line.
If the memory is full then it will announce, “Memory full, thank you for calling” and disconnect the line.
Your Response 75 can record up to 30 messages and memos, within a total recording time of 36 minutes. If the memory capacity is full, the display will flash F and your answering machine will not record further messages.
13
