Buffalo Tools S097 Troubleshooting, Removing the Vacuum Chamber, Replacing the Vacuum Chamber

Telephone Helpline: 0845 146 2887 (United Kingdom) UK

Removing the Vacuum Chamber

1.Pull the chamber release lever.

2.Lift the vacuum chamber and remove it from the appliance.

Replacing the Vacuum Chamber

1.Slot the right end of the chamber into the recess.

2.Ensure the suction nozzle (A) connects securely with the vacuum chamber, and the positioning knob (B) sits securely in its seat.

3.Press the left side of the chamber down until the release lever clicks back into place.

Troubleshooting

Fault	Probable Cause	Action
The unit is not working	The unit is not switched on	Check the unit is plugged in correctly
		and switched on
	Plug and lead are damaged	Call BUFFALO agent or qualified
		technician
	Fuse in the plug has blown	Replace the plug fuse
	Power supply	Check power supply
	Internal wiring fault	Call BUFFALO agent or qualified
		technician
Appliance does not remove all	Open end of bag not	Open lid and reposition bag
the air from the bag	completely inserted
	Gaskets dirty	Clean gaskets
	Open end of bag is dirty	Clean bag
	Bag may be punctured	Line bag with paper towels to protect
		against foodstuffs with sharp edges
		Replace bag
	Incorrect bags used	Call Vacuum Pack machine supplier
Bags are not sealing correctly	Sealing bar is overheating	Open lid and allow sealing bar to cool
		down
	Incorrect bags used	Call Vacuum Pack machine supplier

4