SERVICE (cont.)
LIMIT THERMOSTAT
FIG. 20 LIMIT THERMOSTAT | P1445 |
| |
Location: |
|
The limit thermostat is located in the center of the tank lid.
Test Procedures:
1.Disconnect the dispenser from the power source.
2.Disconnect both black wires from the limit ther- mostat.
3.Check for continuity across the limit thermostat terminals.
If continuity is present as described, the limit thermo- stat is operating properly.
If continuity is not present as described, replace the limit thermostat.
Removal and Replacement:
1.Remove all wires from the limit thermostat ter- minals.
2.Carefully slide the limit thermostat out from un- der the retaining clip and remove the limit ther- mostat.
3.Carefully slide the new limit thermostat into the retaining clip.
4.Refer to Fig. 21 when reconnecting the wires.
BLK to Tank Heater
BLK to Control
Thermostat
P1800
FIG. 21 LIMIT THERMOSTAT TERMINALS
26 | 28364 051100 |
|
