PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

Setting Pulse Brew – MANUAL Pulse Brew

NOTE: If the brewer is already on the SET PULSE BREW screen, skip steps 1 through 6, and proceed directly to step 7.

1.Press and hold the right hidden button until the dis- play reads SET LANGUAGE. Press the right hidden button until the display reads REVIEW RECIPES.

2.Press YES to proceed. The display should now read TEA 1, along with MODIFY SHOW NEXT.

3.Press and release NEXT to advance to the desired coffee recipe to be modified.

4.Press and release MODIFY. The display should read

BREW OZ:

5.Press and release DONE. The display should read

2 BATCHES DONE?

6.Press and release YES. The display should now read SET PULSE BREW.

7.Press and release YES. The display should now read SELECT METHOD.

8.Press and release MANUAL. With MANUAL flash- ing, press and release NEXT.

9.The display should now read 1st ON TIME and a batch light will be blinking. Press and release the batch size to be modified.

10.Using (-)and (+), adjust the 1ST ON TIME.

11.When finished, press the other batch size and repeat step # 10.

12.When finished setting both batch sizes, press and release DONE.13.The display should now read OFF TIME. Adjust the OFF TIME using (-)and (+).

14.When finished, press the other batch size and repeat step # 13.

NOTE: To disable pulse brew, set 1ST ON TIME to OFF. For recipes with a brew volume greater than 86.0 oz. and pulse brew disabled, the following message will appear after the BREW button is pressed, COFFEE FUNNEL?...PRESS BREW "X".

15.When finished setting both batch sizes, press and release DONE.

16.The display should now read LAST ON:. Adjust the LAST ON TIME using (-)and (+). If PREINFUSION is desired, set the LAST ON TIME to PreI.

17.When finished, press the other batch size and repeat step # 16.
18.When finished setting both batch sizes, press and release DONE.

19.The display will show the three times just entered. Press and release each batch size to display the set- tings for that batch. If the 1ST ON TIME is set to OFF, the display will read PULSE BREW DISABLED. After a 5 second delay, the display will read 2 BATCHES

DONE?

20.If both the pulse brew settings for both batch sizes are not correct, press and release NO to return to the 1ST ON TIME setup screen and repeat steps 10 through 19.

21.If both batch sizes are correct, press YES. The display should now read DRIP TIME. To exit to the MAIN SCREEN, press and release the ON/OFF button.

Page 37

36748 070706