PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

ENABLE ENERGYSAVR

This function allows the operator to enable the mode function and set the idle time. Once the set idle time has expired, the operator can choose to have the heaters either turn off, or reduce the tank holding temp to 140° F (60° C).

Procedure to enable energy savings mode:

Range: 0.5 to 24.0 hrs. If enabled, default setting is 140°F tank temperature after 4.0 hrs. idle time.

1.Press and hold the right hidden button until the display reads SET LANGUAGE. Press the right hidden button until the display reads ENABLE ENERGYSAVR. The YES or NO will be flashing to indicate the current selection.

2.Press and release the NO button to disable this function, or:

3.Press and release the YES button to enable this function (the heaters will either turn off or the tank will hold at 140° F).

4.When finished, press and release DONE to save the new setting and advance to the next function screen.

5.If NO was selected, the display should now read EnableFreshTimer. To exit programming and return to the MAIN SCREEN, press and release the ON/OFF pad.

6.If YES was selected, the display should now read X.X HRS -> IDLE. This screen allows the operator to set the amount of time the brewer is not in use before nap mode engages. Using (-)and (+), adjust the idle time. When finished, press and release

DONE.

7.The display should now read AFTER IDLE TIME? Once the set idle time has expired, the heaters can either be shut off or held at a lower temperature of 140° F.

8.To have the machine shut off after the set idle time, press and release OFF and then DONE to save the settings. The display should read MACHINE OFF AFTER X.X HRS, and then EnableFreshTimer.

9.To have the heaters hold at the lower 140° F temperature, press and release 140° F and then DONE to save the settings. The display should read MACHINE AT 140° F AFTER X.X HRS, and then

EnableFreshTimer.

10.Once the idle time has expired, the display will read either ENERGY SAVER...NO TEMPERATURE or ENERGY SAVER...REDUCED TEMPERATURE, depending on the settings. This screen will alternate with PRESS ANY SWITCH TO RE-HEAT.

ENABL ENERGYSAVR

 

 

 

 

 

NO

DONE

YES

 

 

 

 

 

 

 

 

 

 

 

 

WITH NO FLASHING

 

BREW

BREW

BREW

WITH YES FLASHING

 

 

PRESS DONE

 

A

B

C

PRESS DONE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRESSING DONE WILL

 

 

X.X HRS-> IDLE

 

 

ADVANCE TO

 

 

 

 

ENABLEFRESHTIMER

 

 

(-) DONE (+)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BREW

BREW

BREW

 

 

 

 

 

 

 

A

 

B

 

C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AFTER IDLE TIME?

 

 

 

 

 

 

 

OFF

DONE

140°

 

 

 

 

 

 

 

BREW

BREW

BREW

 

 

 

 

 

 

 

A

 

B

 

C

 

 

 

MACHINE OFF

 

 

MACHINE AT 140°

 

AFTER X.X HRS

 

 

AFTER X.X HRS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENABLEFRESHTIMER

 

 

 

 

 

NO

 

 

YES

 

 

 

 

 

 

 

 

 

 

 

 

 

P2874

Page 45

36748 070706