SERVICE (Cont.)

AC MOTOR AND GRIND CHAMBER

FIG. 3 AC MOTOR AND GRIND CHAMBERP1704

Location:

The motor is located inside the upper part of the grinder housing.

Test Procedure:

1.Remove the plug located on the right side of the housing. Press the red “Reset” button visible through the opening. Listen carefully for a “click”. This resets the motor protection circuit and may indicate that something other than coffee was inserted into the hopper for grinding.

If the grinder remains unable to start, proceed to #2. If the grinder stops operating shortly after starting, refer to removal and replacement instructions and inspect for foreign materials.

2.Disconnect the grinder from the power source and place a coffee bag behind the dispense chute.

3.Remove the electrical access panel at the rear of the motor.

4.Check the voltage across the white, red or red/ black and white/blue wires on terminals L1 & L2 with a voltmeter. Connect the grinder to the power source. When the Off/On/Start switch is momen- tarily placed in the “START” (lower) position and then left in the “ON” (center) position and a bag is in place behind the coffee dispense chute.

The indication must be:

a.120 volts ac for two wire 120 volt models.

b.230 volts ac for two wire 230 volt models

c.240 volts ac for two wire 240 volt models.

5.Disconnect the grinder from the power source.

If voltage is present as described replace the motor. If voltage is not present as described, reconnect the white, red or red/black and white/blue wires to the mo- tor, refer to the Wiring Diagrams and check the grinder wiring harness.

Removal and Replacement - Motor (Refer to FIG.6):

1.Remove the plate on the rear of the motor and disconnect all wires from the motor.

2.Remove the two .250”-20 screws (1) securing grind selector dial plate and grind selector knob

(2)to the grind chamber. Remove dial plate and selector knob as an assembly.

3.Slide burr (7), auger rotor/spring assembly (3), shear plate (4) and burr rotor cup (5) off the grinder motor shaft as an assembly.

4.Remove the two .250”-20 screws (8) securing the stationary burr (9) to the grind chamber.

5.Remove bushing (10) and shaft extension (11) from the grinder motor shaft.

6.Remove the two #8 thread forming screws (12) securing the fill plate (13) to grinder housing and remove plate (13).

7.Remove the four #10-24 screws (14) securing the chute assembly (15) to the grind chamber and remove chute assembly (15).

8.Remove the four .250”-20 screws, flat washer and rubber washers securing the motor to the mount- ing bracket.

9.Remove motor out the rear of the grinder hous- ing.

10.Remove the four .250”-20 cage nuts from the motor mount.

16

41545 122209

 

Page 15 Page 17
Page 16
Image 16
Bunn LPG-2, G9WD, G9-2T DBC, FPG AC Motor and Grind Chamber, Remove the electrical access panel at the rear of the motor
Page 15 Page 17

FPG-2, G1, FPG, G9-2T DBC, G9-2 specifications

Bunn has established itself as a leader in the coffee and beverage equipment industry, providing advanced solutions that cater to a variety of needs. Among its notable products are the Bunn LPG-2, G9, FPG-2, G9-2, and G9WD, which showcase the company’s commitment to innovation, quality, and efficiency.

The Bunn LPG-2 is an ideal solution for high-volume coffee production. This model features a two-watt heating element that ensures rapid brew cycles and consistent temperature control. With a sleek design and user-friendly interface, the LPG-2 simplifies the brewing process while delivering exceptional coffee quality. Its large capacity enables institutions to serve multiple customers simultaneously, making it suitable for restaurants, cafes, and hotels.

The G9 series, particularly the G9 and G9-2, are known for their versatility and robust performance. Both models come equipped with a stainless steel hot water faucet, allowing users to draw hot water for various applications such as tea or soup preparation. The G9 model is designed for single-brew operation, while the G9-2 accommodates dual brewing, making it an efficient choice for those needing to meet demand quickly. Additionally, both G9 models have advanced brewing technology to ensure optimal flavor extraction.

The FPG-2 model stands out for its precision and control over brewing parameters. It features a touchscreen interface that allows users to customize brew strength and temperature, ensuring that each cup meets individual preferences. The FPG-2 is also remarkably user-friendly, which is essential in a busy environment. Its dual-brew functionality allows it to serve two different coffee options simultaneously, enhancing service efficiency.

The G9WD is designed for those who require the ultimate convenience. Featuring a built-in water line connection, the G9WD minimizes the need for manual refilling, ensuring a continuous supply of fresh coffee. This model is equipped with a programmable timer, allowing users to set brew cycles in advance, which can be a significant time-saver during peak hours.

In summary, the Bunn LPG-2, G9, FPG-2, G9-2, and G9WD offer a range of features that cater to various coffee brewing needs. With advanced technologies, efficient designs, and user-centric interfaces, these models are engineered to deliver consistent, high-quality beverages, making them essential tools for any coffee-focused establishment. Whether for high-volume brewing or versatile beverage options, Bunn's offerings stand out in the competitive landscape of beverage equipment.
Top Page Image Contents