SERVICE (Cont.)

MOTOR (Models LPG & FPG)

 

13

 

 

 

 

 

 

 

 

 

MODEL LPG ONLY

 

 

 

 

 

 

10

11

12

13

14

15

16

17

18

 

 

 

 

FIG. 12 ROTOR/AUGER, BURRS AND MOTOR COVER

P1051

 

 

 

 

20.Remove the two #8-32 flat head screws securing the motor cover (18) to the motor and housing assembly (17) and remove the cover. Set aside for reassembly.

21.Discard old motor and housing assembly.

22.Place new motor on it’s side and install motor cover

(18)using two #8-32 flat head screws.

23.Install upper burr (16) to the new motor and hous- ing assembly (17) using two #10-32 binding head screws.

24.Install spring retaining bushing (15) on motor shaft.

25.Refer to Fig. 11. Install burr housing divider (8) in slot in the burr housing and secure with #8-32 cup point setscrew (7), for Model LPG-2E only.

26.Refer to Fig. 12. Install rotor (12), lower burr (13) and spring (14) as an assembly on the motor shaft.

27.Install load disc (11) flat side towards rotor.

28.Install burr housing cap (10), adjusting screw, dechaffing spring plate and dechaffer support as an assembly to the new motor and housing assembly

(17)using two #10-32 fillister head screws.

29.Set motor upright with burr housing at the bot- tom.

NOTE: Steps 30 thru 33 apply only to Model LPG-2E.

30.Install solenoids and solenoid bracket (4) as an assembly on the new motor.

31.Install spacer plate (3) making sure the hole in the spacer plate aligns with the hole in the mounting ring.

32.Install solenoid plunger with spring and slide plate

(2) as an assembly into the solenoid coil. Place slide plate on the dowel in the mounting ring. Repeat for the opposite side.

33.Install retaining ring w/hopper gasket (1) using three #8-32 pan head screws and three #8-32 keps nuts.

34.Refer to Fig.10. Install motor, solenoids and solenoid components (2) in the hopper housing (3) using three #10-32 truss head screws (1).

35.Reconnect wires for motor and solenoids. Refer to wiring schematic.

24

41545 122209

 

Page 24
Image 24
Bunn LPG-2, G9WD, G9-2T DBC, FPG, G1 Install load disc 11 flat side towards rotor, ROTOR/AUGER, Burrs and Motor Cover

FPG-2, G1, FPG, G9-2T DBC, G9-2 specifications

Bunn has established itself as a leader in the coffee and beverage equipment industry, providing advanced solutions that cater to a variety of needs. Among its notable products are the Bunn LPG-2, G9, FPG-2, G9-2, and G9WD, which showcase the company’s commitment to innovation, quality, and efficiency.

The Bunn LPG-2 is an ideal solution for high-volume coffee production. This model features a two-watt heating element that ensures rapid brew cycles and consistent temperature control. With a sleek design and user-friendly interface, the LPG-2 simplifies the brewing process while delivering exceptional coffee quality. Its large capacity enables institutions to serve multiple customers simultaneously, making it suitable for restaurants, cafes, and hotels.

The G9 series, particularly the G9 and G9-2, are known for their versatility and robust performance. Both models come equipped with a stainless steel hot water faucet, allowing users to draw hot water for various applications such as tea or soup preparation. The G9 model is designed for single-brew operation, while the G9-2 accommodates dual brewing, making it an efficient choice for those needing to meet demand quickly. Additionally, both G9 models have advanced brewing technology to ensure optimal flavor extraction.

The FPG-2 model stands out for its precision and control over brewing parameters. It features a touchscreen interface that allows users to customize brew strength and temperature, ensuring that each cup meets individual preferences. The FPG-2 is also remarkably user-friendly, which is essential in a busy environment. Its dual-brew functionality allows it to serve two different coffee options simultaneously, enhancing service efficiency.

The G9WD is designed for those who require the ultimate convenience. Featuring a built-in water line connection, the G9WD minimizes the need for manual refilling, ensuring a continuous supply of fresh coffee. This model is equipped with a programmable timer, allowing users to set brew cycles in advance, which can be a significant time-saver during peak hours.

In summary, the Bunn LPG-2, G9, FPG-2, G9-2, and G9WD offer a range of features that cater to various coffee brewing needs. With advanced technologies, efficient designs, and user-centric interfaces, these models are engineered to deliver consistent, high-quality beverages, making them essential tools for any coffee-focused establishment. Whether for high-volume brewing or versatile beverage options, Bunn's offerings stand out in the competitive landscape of beverage equipment.