Bushnell 119405, 119415 instruction manual Setting Camera Mode, Formatting the SD Card

Figure 5: Setting Camera Mode

(a) (1)

(b) (2)

(c) (3)

4.1.2Formatting the SD Card

a)The system will delete all files stored in the SD card after formatting. Therefore you should make sure that you have made a backup of important data. In MENU state press UP or DOWN key until the system enters into the format menu, shown in Fig. 6(a) and 6(1).

b)Push the OK key. Then the system will ask you to decide whether to format the SD-card or not, shown in Fig. 6(b) and 6(2).

c)If you want to proceed the formatting process, push the RIGHT or LEFT key to change the value to [YES]. [YES] will be highlighted, shown in Fig. 6(c) and 6(3).

d)Push the OK key to start formatting the SD card. During formatting the guide information will be changed, shown in Fig. 6(d) and

12