Bushnell 119415, 119405 instruction manual Default settings of the Bushnell Trophy CAM

Table 1: Default settings of the BUSHNELL TROPHY CAM

Parameter name	Default	Other settings
Camera Mode	Camera	Video
Image Size	3M Pixel	5M Pixel
Video Size	640×480	320x240
Capture Number	1 Photo	2 Photo, 3 Photo
Video Length	Avi 10 Second	1-60 seconds
Interval	1 Minute	0-59 seconds, 1-60 minutes
Sense Level	Normal	High, Low
Time Stamp	On	Off
Timer Switch	Off	On (00:00 – 23:59)

In the ON (Live) mode the BUSHNELL TROPHY CAM is ready for motion detection. After having entered the ON mode, the BUSHNELL TROPHY CAM will take pictures or videos automatically according to previous settings when it is triggered by detection of activity. The pictures or videos are saved on the SD-card. Every picture or video has its own file name.

Before entering into the ON mode please pay attention to the following:

(1)The polarities of the power are correct and the power is sufficient.

(2)The SD-card has sufficient space and its write-protection is disabled.

(3)Power switch at ON position.

(4)Avoiding temperature and motion disturbances in front of the device such as aiming at a heat source or obstructions from tree branches or brush.

(5)The height away from ground for placing the device should vary with the object size appropriately. In general, 3 to 6 feet is preferred.

9