4.1.9 Setting PIR Sensitivity
This parameter defines the sensitivity of the PIR. There are three degrees: High, Normal and Low with default value “Normal”. The higher degree indicates that the BUSHNELL TROPHY CAM is more easily triggered by motion, taking more pictures or recording more videos. It is recommended to use high sensitivity degree in warmer environments, and to use lower sensitivity for cooler environments.
The following shows you how to set PIR sensitivity as “Low” provided that the previous value is “Normal” in MENU state:
a)Push the UP or DOWN key until the parameter “Sensor Level” appears as shown in the Fig. 13(a) and 13(1).
b)Push the RIGHT or LEFT key until the value changes to “Low” as shown in the Fig. 13(b) and 13(2).
c)Press OK key for saving setting or MENU key for canceling operation and exiting. After pressing OK key the selected value will be no more highlighted, shown in the Fig. 13(c)
Figure 13: Setting PIR Sensitivity
(a) | (1) |
(b) | (2) |
(c) | (3) |
22
