Cables to Go 8 3 Digital Effects Processor

3 Digital Effects Processor

Onboard your MultiMix 8 USB™ is a powerful effects unit that

has 100 preset programs. We offer a few tips on where to use

these, but don’t limit yourself to our suggestions. We recommend

that you experiment with these effects to get a good feel for

how they can improve your mixes.

You can use this knob to assign one of 100 effect programs

to your mix. Turning the knob to the right increments the

program number, and turning it to the left decrements the

program number. You can control the level of the effect for each

channel via the channel’s AUX B knob. You must PRESS the

effect knob to activate the selected effect.

This display shows you the number of the current program.

When lit, this LED tells you that there is a signal clip at the

internal effects input. This means that you should reduce the signal

via the EFFECTS / AUX RET B LEVEL control.

When lit, this LED indicates that the effects processor is receiving

a signal.

This type of reverb simulates the ambience of a grand concert hall.

This type of reverb reproduces the more intimate ambiance of

natural room acoustics.

These are simulations of metal plate reverbs, as used on classic

recordings from the '70s and '80s.

These are simulations of the reverb created by artificial echo

chambers, as used on classic recordings of the '50s and '60s.

You cannot use the AUX B RETURN and the

on-board effects at the same time.