Cables to Go TE100-S55 manual Starting XPressView, Start From Scratch

Starting XPressView

After you install the XPressView program, you are ready to begin SNMP management of your TE100-S55.

•From Windows start screen, click the XPressView icon. The Welcome screen will appear.

START FROM SCRATCH

If this is your first time to run the XPressView program, you will need to create an environment that represents the TE100-S55.

•Click the AUTO DISCOVERY icon.

• Enter the range of IP addresses to

search and XPressView will auto-detect all of the TE100-S55 switches in your network.

**As an option, you can click the DEVICE icon and manually type each IP address of your TE100-S55.

•For future use, save this environment by going to the NETWORK menu and clicking the SAVE command.

NOTE: Each switch must have a unique IP address in order to communicate with the network manager. The factory default IP address of each TE100-S55 is 168.8.xxx.xxx. The last two bytes of the IP address are identical to the last two bytes of the MAC address, which is displayed on the back of each TE100-S55. The MAC address can also be referenced through out-of-band management (see chapter 3, page 24).

37