58 Configuring & Monitoring The Switch ELS100-24TX
7. From the main VLAN Configuration Menu , select V LAN Port Men u to
configure the VLAN port mode (hybrid or acces s) for indi vidu al ports .
Configuring Class of Service
You can configure Class of Service pa rameters usi ng the Class of Service
Configuration Menu. This menu permits you to co nfigur e priority lev els to
traffic being forwar ded through the switch . During periods of cong estion,
Class of Service settings ensure that traffic whi ch has been assign ed high
priority is forwarded through the switch ahea d of normal prior ity traffic. For
further informatio n, see Appendix E, “ C l ass of Service.”
To configure Class of Service, do the following:
1. Select Class of Service Configuration Menu from the Switch
Configuration Menu.
2. Turn the global switch Class of Service oper ation on or off by to ggling
the Class of Service Enable option by pressing a.
3. Select Priority Threshold and type a number between 0 and 7.
4. Select Configure Port Priority.
The Port Priority Menu displays. From this menu, individual port pri-
ority levels can be configured.
Configuring Port Operation
You can configure ports for operational parameters such as auto-
negotiation, duplex mode, port speed and flow control.
To configure port operation, do the following:
1. Select Port Menu from the Main Menu.
2. Select Configure and enter an individual port nu mber or multip le port
numbers. Press [Enter].
The port number(s) entered displays on the top of the Port
Configuration screen.
3. Select Port Name and enter a Port Name. Press [Enter].
4. Select Port Enable to toggle between enabling (Yes) and disabling
(No) the port(s).
Examples: You can configure an individual port or
multiple ports, separated by commas or hyphens,
in either:
a list: ports 1, 3, 5, 7
a range: ports 6-9
or a combination of both: 1, 3, 5, 7, 10-15, 21, 23