Fddi Port Status LEDs, LED Color | Cabletron Systems FDDI Repeater

LANVIEW LEDs

The functions of the FDDI Port Status LEDs are listed in Table 4-2.

Table 4-2. FDDI Port Status LEDs

LED Color	STATE


Green	Link, Active, Port Enabled

Yellow	Link, Not Active, Port Enabled

Red	Not Link, Port Disabled

Red (Flashing)	Link, Port Disabled

Off	No Link, Not Active, Port Enabled

The functions of the FDDI Status LEDs are listed in Table 4-3.

Table 4-3. FDDI Status LEDs

LED Color

State

Green

Inserted

Red

Isolated

Yellow

Wrapped

Off

Bypassed

4-3

Image 24

Cabletron Systems FDDI Repeater manual Fddi Port Status LEDs, Fddi Status LEDs, LED Color State

Contents

MMAC-Plus9F206-02 Fddi Repeater MicroLAN Module User’s Guide Page FCC Notice DOC Notice Safety Information Class 1 Laser Transceivers Laser Radiation and Connectors Contents Features Introduction Lanview LEDs 9F206-02 Related Manuals Getting Help Installing the MicroLAN Module Installing an FpimUnpacking the Module Installing an Fpim User-Accessible Components User-Accessible Components Setting the Module Card DIP Switch Location of Module DIP Switch Function of DIP Switch Switch Function Description Off Factory Default Installing the Module into the MMAC-Plus Chassis Installing the MicroLAN Module Reset Switch Reset Switch Operation Flexible Network Bus FNB System Diagnostic Controller System Management BusDC/DC Converter FNB Interface CPU Lanview LEDs F206-02 Lanview SMB and CPU LEDs LED Color State Description Fddi Port Status LEDs Fddi Status LEDsLED Color LED Color State Safety ServiceGeneral Speciﬁcations Physical Fpim Speciﬁcations FPIM-00 and FPIM-01Table A-1. FPIM-00 and FPIM-01 Speciﬁcations Parameter Typical Value Worst Worst Case Budget Table A-2. Transmitter Power Parameters FPIM-02 and FPIM-04Table A-3. FPIM-04 Pinouts Pin Number Represents FPIM-05 and FPIM-07 Table A-4. FPIM-05 and FPIM-07 SpeciﬁcationsParameter Typical Minimum Maximum