User-Accessible Components | Cabletron Systems FDDI Repeater

User-Accessible Components

User-Accessible Components

Figure 2-2 shows the various components that are accessible to the user. These consist of an eight position dip switch (explained in the next section) and sockets for replaceable PROMs. These will be used for future upgrades. Instructions for installing the components will be supplied with the upgrade kit.

SMB-1

PROM

Boot PROM

DIP Switch

Figure 2-2. User-Accessible Components

2-3

Image 13

Cabletron Systems FDDI Repeater manual User-Accessible Components

Contents

MMAC-Plus9F206-02 Fddi Repeater MicroLAN Module User’s Guide Page DOC Notice FCC Notice Class 1 Laser Transceivers Safety Information Laser Radiation and Connectors Contents Introduction Features Lanview LEDs 9F206-02 Getting Help Related Manuals Installing an Fpim Installing the MicroLAN ModuleUnpacking the Module Installing an Fpim User-Accessible Components User-Accessible Components Location of Module DIP Switch Setting the Module Card DIP Switch Switch Function Description Off Factory Default Function of DIP Switch Installing the Module into the MMAC-Plus Chassis Installing the MicroLAN Module Reset Switch Reset Switch Flexible Network Bus FNB Operation System Management Bus System Diagnostic ControllerDC/DC Converter FNB Interface CPU F206-02 Lanview Lanview LEDs LED Color State Description SMB and CPU LEDs Fddi Status LEDs Fddi Port Status LEDsLED Color LED Color State Service SafetyGeneral Speciﬁcations Physical FPIM-00 and FPIM-01 Fpim SpeciﬁcationsTable A-1. FPIM-00 and FPIM-01 Speciﬁcations Parameter Typical Value Worst Worst Case Budget FPIM-02 and FPIM-04 Table A-2. Transmitter Power ParametersTable A-3. FPIM-04 Pinouts Pin Number Represents Table A-4. FPIM-05 and FPIM-07 Speciﬁcations FPIM-05 and FPIM-07Parameter Typical Minimum Maximum