SVC Retry Timer, SVC Idle Timer, Max VC | Cabletron Systems FRX6000

IP Interface Conﬁguration

SVC Retry Timer

This parameter is only conÞgurable if you have selected X.25 as your Interface Type. It speciÞes the time (in seconds) between calls that are placed to try to establish an X.25 connection. The default value for this parameter is 20.

SVC Idle Timer

This parameter is only conÞgurable if you have selected X.25 as your Interface Type. It speciÞes the amount of time (in minutes) that IP will remain active with no trafÞc, before the X.25 connection is cleared. The default value for this parameter is 1.

Max VC

This parameter is only conÞgurable if you have selected X.25 as your Interface Type. It speciÞes the maximum number of virtual circuits over which IP trafÞc will be transmitted in parallel. The default value for this parameter is 1.

PVC Connection

This parameter is only conÞgurable if you have selected X.25 as your Interface Type. Select Yes if the interface is a Permanent Virtual Circuit (PVC); select No if it is not. The default value for this parameter is No.

Source RLP

This parameter is only conÞgurable if you have selected Frame Relay as your Interface Type. It identiÞes the RLP for the logical interface at this end of the frame relay link. Enter 0 for FRX4000 and SmartSwitch 1800 devices (for RLP0); enter 0 - 7 for an FRX6000.

Source Port

This parameter is only conÞgurable if you have selected Frame Relay as your Interface Type. It identiÞes the physical frame relay port for the logical interface at this end of the frame relay link. Make sure the physical frame relay port you identify is not conÞgured for backup use only.

Source DLCI

This parameter is only conÞgurable if you have selected Frame Relay as your Interface Type. It identiÞes the DLCI for the logical interface at this end of the frame relay link. Make sure the DLCI you identify is not part of a frame relay DLCI backup group or intra-nodal frame relay PVC.

RIP Support

This Þeld speciÞes the level of RIP support on the interface. If you select Enabled, all RIP messages will be accepted, and messages of the RIP version conÞgured in IP Node Defaults (see page 9-1) will be transmitted. If you select Disabled, no RIP messages will be accepted or transmitted. If you select Receive Only, RIP messages will be accepted, but not transmitted. The default value for this parameter is Enabled.

Conﬁguring IP Interfaces

9-7

1800, FRX4000, FRX6000 specifications

Cabletron Systems, a leading player in network management and telecommunications solutions during the late 20th century, introduced several innovative products that played a crucial role in shaping enterprise networking. Among these were the Cabletron FRX6000, FRX4000, and the FRX1800, which delivered advanced features aimed at enhancing network performance, security, and scalability.

The Cabletron FRX6000 was designed as a robust multi-layer switch, ideal for large-scale enterprise environments. It supported extensive routing capabilities, allowing organizations to manage traffic efficiently even under heavy loads. The FRX6000 boasted high throughput rates and low latency, making it suitable for demanding applications. With support for various network protocols, including IP, IPX, and AppleTalk, its adaptability made it a versatile choice for diverse networking needs. Moreover, security features like VLAN support and Access Control Lists (ACLs) provided enhanced protection against potential threats.

Moving to the FRX4000, this model offered a balance between performance and cost-effectiveness. The FRX4000 maintained many of the essential features of its larger counterpart while catering to medium-sized enterprises. It provided Layer 3 routing and could handle multiple simultaneous connections, ensuring seamless communication across departments. The modular design allowed for easy upgrades, enabling businesses to expand their network infrastructure without significant overhauls. This made the FRX4000 an attractive option for organizations looking to optimize their network investments.

Lastly, the FRX1800, designed for small to medium businesses, focused on simplicity and ease of use while still incorporating powerful network management capabilities. Its user-friendly interface made it accessible for organizations lacking extensive IT resources. The FRX1800 provided essential functionalities such as Integrated Layer 2 switching and routing, network monitoring, and basic security features, ensuring that even smaller companies could maintain efficient, reliable networking without overwhelming complexity.

All three models utilized advanced technologies, including a high bandwidth backbone and state-of-the-art switching architecture, to enable fast and reliable data transfer. They also supported Quality of Service (QoS) mechanisms, allowing businesses to prioritize critical applications and ensure consistent performance across the network.

In summary, the Cabletron FRX6000, FRX4000, and FRX1800 were pivotal in enhancing network capabilities, providing organizations with scalable, secure, and high-performance options tailored to their specific needs.

Cabletron Systems FRX6000 SVC Retry Timer, SVC Idle Timer, Max VC, PVC Connection, Source RLP

Models: 1800 FRX4000 FRX6000