Ext. Digits Source, Forwarded Type | Cabletron Systems 1800 specs

SmartSwitch 1800 Voice Conﬁguration

A higher suppression level saves composite bandwidth, allowing more data channels to operate simultaneously with voice channels. The default value for this parameter is low.

Ext. Digits Source

This parameter is relevant if the Dial Digits parameter conÞgured in the Voice Parameters window (see ConÞguring System-Level Voice Parameters, page 12-2) is greater than 0. It speciÞes the source of extended digits when the user of attached equipment dials a speed-dial number. When Map is speciÞed, extended digits are taken from the Extended Dial String in the Speed Dial ConÞguration Table. When User is speciÞed, extended digits are taken from the user of attached equipment (i.e., the user must dial a speed-dial number and an extended digit string).

If you specify User, you must set the Dial Timer (see above) to a value other than 0. The default value for this parameter is Map.

Forwarded Type

This parameter is relevant only if Forwarded Digits (see below) is set to All or Extended. It speciÞes how the dial digits will be forwarded. The default value for this parameter is DTMF (dual-tone).

Forwarded Digits

This parameter speciÞes which dial digits (if any) to forward (i.e., to output at the remote voice/fax card). If None is selected, dial digits are not forwarded to the destination device when a call is initiated on this port. If All is selected, the speed-dial number and associated extended digits are forwarded to the destination device. If Extended is selected, only the extended digit string is forwarded. The source of extended digits (i.e., from the map table or dialed by the user) is speciÞed by Ext. Digits Source (see above). The default value for this parameter is None.

Tone Type

This parameter determines whether the multi-frequency tone will be DTMF (dual-tone) or MF (single-tone). The default value for this parameter is DTMF.

Blocked Flag

This value will cause the port to be enabled (if No) or disabled (if Yes) when the device is powered up or rebooted. Whichever state is selected, the port will remain in that state until this value is changed or until an enable or disable action is performed. The default value is No.

Link Down Busy

This parameter enables or disables automatic busy-out of channels when the link is down. When this parameter is enabled, the system will automatically busy-out channels when the composite link is down. When disabled, channels remain on-hook when the link is down. If your application is connected to a PBX that can route calls to an alternate source (e.g., an ACD) based on an Òall busyÓ condition, enable this parameter so the PBX will recognize this condition and reroute the

12-14

Conﬁguring Voice Ports

1800, FRX4000, FRX6000 specifications

Cabletron Systems, a leading player in network management and telecommunications solutions during the late 20th century, introduced several innovative products that played a crucial role in shaping enterprise networking. Among these were the Cabletron FRX6000, FRX4000, and the FRX1800, which delivered advanced features aimed at enhancing network performance, security, and scalability.

The Cabletron FRX6000 was designed as a robust multi-layer switch, ideal for large-scale enterprise environments. It supported extensive routing capabilities, allowing organizations to manage traffic efficiently even under heavy loads. The FRX6000 boasted high throughput rates and low latency, making it suitable for demanding applications. With support for various network protocols, including IP, IPX, and AppleTalk, its adaptability made it a versatile choice for diverse networking needs. Moreover, security features like VLAN support and Access Control Lists (ACLs) provided enhanced protection against potential threats.

Moving to the FRX4000, this model offered a balance between performance and cost-effectiveness. The FRX4000 maintained many of the essential features of its larger counterpart while catering to medium-sized enterprises. It provided Layer 3 routing and could handle multiple simultaneous connections, ensuring seamless communication across departments. The modular design allowed for easy upgrades, enabling businesses to expand their network infrastructure without significant overhauls. This made the FRX4000 an attractive option for organizations looking to optimize their network investments.

Lastly, the FRX1800, designed for small to medium businesses, focused on simplicity and ease of use while still incorporating powerful network management capabilities. Its user-friendly interface made it accessible for organizations lacking extensive IT resources. The FRX1800 provided essential functionalities such as Integrated Layer 2 switching and routing, network monitoring, and basic security features, ensuring that even smaller companies could maintain efficient, reliable networking without overwhelming complexity.

All three models utilized advanced technologies, including a high bandwidth backbone and state-of-the-art switching architecture, to enable fast and reliable data transfer. They also supported Quality of Service (QoS) mechanisms, allowing businesses to prioritize critical applications and ensure consistent performance across the network.

In summary, the Cabletron FRX6000, FRX4000, and FRX1800 were pivotal in enhancing network capabilities, providing organizations with scalable, secure, and high-performance options tailored to their specific needs.

Cabletron Systems 1800, FRX4000 Ext. Digits Source, Forwarded Type, Forwarded Digits, Tone Type

Models: 1800 FRX4000 FRX6000