IPX Interface Configuration

10-12 Configuring IPX Static Routes

To modify an existing entry:
1. In the list box, click to select the Static SAP Route you wish to modify. The
selected entry will be highlighted. (Note that you can only modify one entry at
a time.)
2. Edit the fields, as desired. If you would like to return to the original values,
click on the Refresh button.
3. Click on to modify the selected entry.
To delete an existing entry:
1. In the list box, click to select the Static SAP Route you wish to delete. The
selected entry will be highlighted. (Note that you can only delete one entry at
a time.)
2. Click on to delete the selected entry.
IPX Static Route Configuration
To access the IPX Static Route ConÞguration window:
1. Click on the button to display the Device menu.
2. Drag down to IPX Static Route Configuration, and release. The IPX Static
Route Configuration window, Figure 10-4, will appear.
NOTE
After you have made system-level changes (such as conÞguring an IPX Interface), you
must apply those changes by rebooting the FRX or SmartSwitch 1800 device, or through
console management via the [F7] command.