Cabletron Systems SEH-32, SEH-34, SEH-24 manual Wall Mounting the SEH

INSTALLATION

3.2.4Wall Mounting the SEH

When you wall mount the SEH, the cable connections must face down. Refer to Figure 3-6 and perform the following steps to wall mount the SEH.

Note: 1/4-inch Molly screw anchors for wall mounting are not included with the SEH-ACCY-KIT package.

1.Use the supplied screws to attach the wall mounting brackets to the bottom of the SEH as shown in Figure 3-6. There are two brackets, one for each side.

Molly Screw

Anchors

Molly Screws

Bracket Screws

Wall Mounting Bracket

Figure 3-6. Installing the Wall Mounting Brackets

2. Select the wall location for the SEH within 7 feet of a power outlet.

Warning: There is a potential SHOCK HAZARD if there is electrical wiring within the wall that interferes with drilling for pilot holes. Select a wall location where drilling pilot holes for the Molly screws will not come in contact with electrical wiring in the wall.

Page 3-6