Managing the Device 2-15

Using the TSX-1620 Hub View
Managing the Device
In addition to the performance information described in the preceding section,
the Hub View also provides you with the tools you need to configure your TSX-
1620 and keep it operating properly. Device management functions include
setting polling intervals, performing bridge configuration, setting community
names, performing console configuration, performing If configuration,
performing NetBIOS configuration, viewing and changing system information,
configuring port security, viewing the interface list, accessing the MIB I, II Tool,
accessing bridge management, performing source routing configuration for TSX-
1620 ports, viewing a bridge port’s source address list, and enabling and disabling
bridging for the ports.

Setting the Polling Intervals

To set the polling intervals used by SPMA and the TSX-1620:
1. Click on to display the Device menu.
2. Drag down to Polling Intervals, and release.
Figure 2-7. TSX-1620 Polling Intervals
3. To activate the desired polling, click mouse button 1 on the selection box to
the right of each polling type field.
4. To change a polling interval, highlight the value you would like to change, and
enter a new value in seconds. Note that the Use Defaults option must

not

be
selected, or values will revert back to default levels when you click on
, and your changes will be ignored.